The GnarWolf Chainguide ISCG-05 rev2 is designed for maximum chain retention while mountain biking or racing particularly rough gravel and CX. It is made for any bike that has ISCG-05 mount and a 1x drivetrain. The GnarWolf Chainguide will keep your chain on your chainring in the roughest and muddiest of conditions. Refer to image on this page for installation and adjustment instructions.

• 8mm ofchainline adjustment via our GuideLock quick adjustment system. No shims required.

• Infinite vertical adjustment between 28 and 36T for round chainrings and 28-34T oval chainrings

• Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide’s adjustments

• All adjustments made with common 4mm hex key

• Designed for the rigors of Enduro, heavy trail, mud and even DH riding, the Wolf Tooth engineers made this guide extremely stiff and strong while keeping it light at 44g

• Specific guide shaping is optimized for use with oval and round chainrings

• Installation takes just a few minutes no need to remove your crank arms

Compatibility

• Designed to fit on any bike with an ISCG 05 Mount
• Installation shown in photos on this page
• Optimized for use with both elliptical and roundchainrings
• Round chainrings 28-36T or oval chainrings 28-34T
• For 1x drivetrain use only
• Minimum distance of 10mm between crank and center of ring
• Not compatible with crankset-mounted bashrings
• Due to frame and bike geometry, there will be some bikes that need modifications or flat out won’t work. Here are the known exceptions:
• Ibis Mojo 3 – will not work
• Ibis Ripmo – will not work
• Ibis Ripley – will not work
• Specialized Stumpjumper 2016-2017 models require 1mm of spacers (washers will work) between the frames ISCG05 mounts and the guide (the guide interferes with the frame otherwise).
• Evil The Following – will not work (upper swing arm interferes)
• Santa Cruz Tallboy & Nomad – will not work

Related Products

Drop-Stop chainrings

Tech Specs

Weight:46g
Material:6061-T6 with stainless steel hardware, glass-filled nylon head
Made in the USA
US Patent10464635

[snippet name=”Prop 65″]

Patent and trademark information